{"product_id":"micoair-f405-v2-stack-with-4in1-50a-bluejay-48k-esc","title":"MicoAir F405 V2 Stack with 4in1 50A Bluejay 48K ESC","description":"\u003cdiv aria-labelledby=\"tab-title-description\" class=\"entry-content woocommerce-Tabs-panel woocommerce-Tabs-panel--description wd-active panel wc-tab\" data-accordion-index=\"description\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"wc-tab-inner wd-entry-content\"\u003e\n\u003cdiv class=\"product__description rte quick-add-hidden\"\u003e\n\u003cp\u003ehe MicoAir F405v2 Flight Controller supports two popular open-source flight control firmwares – INAV and Ardupilot, offering users a wide range of flight control options and customization capabilities. Firmware updates are easily done through Mission Planner or INAV Configurator.\u003cbr\u003e\n\u003cstrong\u003ePioneering Integration of the BMI088 IMU:\u003c\/strong\u003e The MicoAir F405v2 is the first flight controller to incorporate the BMI088 IMU and be compatible with INAV firmware. This IMU is renowned for its excellent stability, high measurement accuracy, and good vibration resistance. Combined with the ESC’s BlueJay 48K firmware to reduce electrical noise interference, it can significantly enhance the positioning accuracy of drones in position mode.\u003cbr\u003e\n\u003cstrong\u003eSimplified Installation Process:\u003c\/strong\u003e The MicoAir F405v2 offers 6 UARTs, 10 PWM outputs, I2C, SWD, and USB Type-C interfaces, supporting a wide range of external device connections. All interfaces, including the ESC, utilize socket connections, greatly simplifying the installation process and avoiding the complexity and potential issues of soldering.\u003cbr\u003e\n\u003cstrong\u003eHigh-Performance MOSFET Devices:\u003c\/strong\u003e The ESC uses 40V 165A RDS=1.1mR MOSFET devices, key to enhancing ESC performance. An RDS(ON) as low as 1.1mR means minimal internal resistance during current flow, reducing energy loss, increasing efficiency, and resulting in lower heat generation and better load capacity. Especially during long periods of high load, this significantly lowers failure rates and extends lifespan.\u003cbr\u003e\n\u003cstrong\u003eEnhanced FPV Flying Experience:\u003c\/strong\u003e The flight controller’s integrated OSD support and VTX compatibility with the DJI O3 Air Unit, along with the ESC’s low-noise characteristics, provide a cleaner power supply for the DJI O3 Air Unit, ensuring good EIS effects.\u003cbr\u003e\n\u003cstrong\u003eAdvantages of Bundle Purchasing:\u003c\/strong\u003e Integrating the flight controller with the ESC not only ensures perfect compatibility between systems but also simplifies the installation process. Additionally, purchasing the bundle offers a more favorable price than buying each component separately, saving costs.\u003cbr\u003e\n\u003cstrong\u003eFlexible Installation and Applicability:\u003c\/strong\u003e The compact and lightweight design of the flight controller and the multi-specification fixed mounting hole design of the ESC provide flexible installation options and broad applicability, thus fitting different sizes and types of drone frames.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirmware\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINAV\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicoAir405v2 is officially supported by \u003cstrong\u003eINAV\u003c\/strong\u003e from version 8.0.0\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also download the old version firmware build by us.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/micoair\/MicoAir405v2\/tree\/main\/Firmware\/INAV\" rel=\"noopener nofollow\" target=\"_blank\" title=\"Github\"\u003eGithub\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eArdupilot\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicoAir405v2 flight controller board is officially supported by \u003cstrong\u003eArdupilot \u003c\/strong\u003estarting from version 4.5.0, you can update the firmware through \u003cstrong\u003eMission Planner\u003c\/strong\u003e or download all the firmware files(Copter\/Heli\/Plane\/Rover\/etc) here:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/firmware.ardupilot.org\/\" rel=\"noopener nofollow\" target=\"_blank\"\u003eArduPilot Firmware Download\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eAlso you can use the online firmware builder provided by \u003cstrong\u003eArdupilot \u003c\/strong\u003eto customize your firmware for MicoAir405v2:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/custom.ardupilot.org\/add_build\" rel=\"noopener nofollow\" target=\"_blank\"\u003eArduPilot Custom Firmware Builder\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications（FC）\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F405RGT6, 168MHz, 1MB Flash\u003c\/li\u003e\n\u003cli\u003eIMU: BMI088\u003c\/li\u003e\n\u003cli\u003eBaro: SPL06\u003c\/li\u003e\n\u003cli\u003eOSD: AT7456E\u003c\/li\u003e\n\u003cli\u003eMicroSD Card Slot\u003c\/li\u003e\n\u003cli\u003e6x UART\u003c\/li\u003e\n\u003cli\u003e10x PWM\u003c\/li\u003e\n\u003cli\u003e1x I2C\u003c\/li\u003e\n\u003cli\u003e1x SWD\u003c\/li\u003e\n\u003cli\u003e2x ADC (VBAT, Current)\u003c\/li\u003e\n\u003cli\u003eUSB Type-C\u003c\/li\u003e\n\u003cli\u003eBEC 5V 3A output (for controller, receiver, GPS, optical flow or other devices)\u003c\/li\u003e\n\u003cli\u003eBEC 9V 3A output (for video transmitter, camera)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUART Mapping\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSERIAL0 -\u0026gt; USB\u003c\/li\u003e\n\u003cli\u003eSERIAL1 -\u0026gt; UART1 (DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL2 -\u0026gt; UART2 (DJI-VTX, DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL3 -\u0026gt; UART3 (GPS)\u003c\/li\u003e\n\u003cli\u003eSERIAL4 -\u0026gt; UART4 (DMA-enabled)\u003c\/li\u003e\n\u003cli\u003eSERIAL5 -\u0026gt; UART5 (ESC Telemetry)\u003c\/li\u003e\n\u003cli\u003eSERIAL6 -\u0026gt; UART6 (RX6 is inverted from SBUS pin, no DMA on TX6)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRC Input\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe default RC input is configured on the UART6_RX inverted from the SBUS pin. Other RC protocols should be applied at other UART port such as \u003cstrong\u003eUART1\u003c\/strong\u003e or \u003cstrong\u003eUART4\u003c\/strong\u003e, and set the protocol to receive RC data: \u003cstrong\u003eSERIALn_PROTOCOL=23\u003c\/strong\u003e and change SERIAL6 _Protocol to something other than ’23’\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOSD Support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MicoAir405v2 supports OSD using OSD_TYPE 1 (MAX7456 driver).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVTX Support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SH1.0-6P connector supports a \u003cstrong\u003eDJI O3 Air Unit\u003c\/strong\u003e connection. Pin 1 of the connector is 9v so be careful not to connect this to a peripheral requiring 5v.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePWM Output\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MicoAir405v2 supports up to 10 PWM outputs.\u003c\/p\u003e\n\u003cp\u003eChannels 1-8 support DShot.\u003c\/p\u003e\n\u003cp\u003eChannels 1-4 support bi-directional DShot. PWM output share grouped and every group must use the same output protocol:\u003c\/p\u003e\n\u003cp\u003e1,2,5,6 are group 1\u003c\/p\u003e\n\u003cp\u003e3, 4 are group 2\u003c\/p\u003e\n\u003cp\u003e7,8 are group 3\u003c\/p\u003e\n\u003cp\u003e9,10 are in group 4\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBattery Monitoring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe board has a internal voltage sensor and connections on the ESC connector for an external current sensor input.\u003c\/p\u003e\n\u003cp\u003eThe voltage sensor can handle up to 6S LiPo batteries.\u003c\/p\u003e\n\u003cp\u003eThe default battery parameters(for Ardupilot) are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBATT_VOLT_PIN 10\u003c\/li\u003e\n\u003cli\u003eBATT_CURR_PIN 11\u003c\/li\u003e\n\u003cli\u003eBATT_VOLT_MULT 21.2\u003c\/li\u003e\n\u003cli\u003eBATT_CURR_SCALE 116.5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MicoAir405v2 does not have a built-in compass, but you can attach an external compass using I2C on the SDA and SCL connector.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting: 30.5 x 30.5mm, Φ4mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 36 x 36 x 8 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications （ESC）\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Voltage Range: 2-6S\u003c\/li\u003e\n\u003cli\u003eMaximum Continuous Working Current: 50A\u003c\/li\u003e\n\u003cli\u003eCurrent Sensor: Yes\u003c\/li\u003e\n\u003cli\u003eESC Firmware: BlueJay 48K\n\u003cul\u003e\n\u003cli\u003eFirmware Version: v0.19.2\u003c\/li\u003e\n\u003cli\u003eControl Signal Support: DShot150\/300\/600\u003c\/li\u003e\n\u003cli\u003eSupports Bidirectional Dshot, Speed Feedback\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixed Mounting Holes:\n\u003cul\u003e\n\u003cli\u003eM4-30.5*30.5mm\u003c\/li\u003e\n\u003cli\u003eM3-20*20mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMOSFET Specifications: 40V 165A RDS=1.1mR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage List:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicoAir F405 V2 Flight Controller * 1\u003c\/p\u003e\n\u003cp\u003eMicoAir 4 in 1 ESC * 1\u003c\/p\u003e\n\u003cp\u003e12AWG Wiring *2\u003c\/p\u003e\n\u003cp\u003eESC Signal Wiring *1\u003c\/p\u003e\n\u003cp\u003eConnecting Wiring *7\u003cbr\u003e\nCapacitance *1\u003cbr\u003e\nXT60 Plug * 1\u003cbr\u003e\nRubber Mat * 8\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eLearn more about this product from the manufacturer: \u003ca href=\"https:\/\/micoair.com\/flightcontroller_micoair405v2\/\" rel=\"noopener nofollow\" target=\"_blank\"\u003eMicoAir405v2 – Flight Controller – MicoAir Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aerodock","offers":[{"title":"Default Title","offer_id":45374630232173,"sku":null,"price":7499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0703\/9572\/3885\/files\/DSC01261_2-768x768-1.webp?v=1782395718","url":"https:\/\/aerodock.in\/products\/micoair-f405-v2-stack-with-4in1-50a-bluejay-48k-esc","provider":"Aerodock","version":"1.0","type":"link"}